Free Shipping Some Special Links
Special Promotions Season 10% off above
Promotion Time (01.01-12.30)
1, High speed electric main bearing all use high speed angular contact ball bearing, axial sets pre-load to improve the support stiffness & grinding precision of spindle under high speed rotation.
2, Motorized spindle can use high speed grease and mist lubrication for different rotating speed
3, Temperature rise caused by high speed rotation, use coolant liquid circulatory system to remove
1. Water-cooled pipe needed to be connected with the motorized spindle while using, then launch
2. Use hand to turn spindle before operating. If there is any inflexible occur, Need to do trouble shooting then check the spindle rotation. It should be counter-clockwise rotation from motorized spindle side, if not, change over.
3. Cooling water used by grinding parts cannot splash on front cap of the motorized spindle before operating in case of burning the motor and bearing. Motor needs absolutely dry, when it is switched on, the cooling liquid can be used, when switched off, shuttle down the cooling liquid first then is the spindle motor.
Voltage:220V(must be outputed via frequency converter)
Clamp cutter diameter:13mm,12.7mm,12mm,11mm,10mm,9mm,8mm,7mm,6mm,5mm,4mm,3mm,3.175mm,3mm,2mm,1mm(standard 6mm)
Spindle net weight:5.3kg
Cooling method:Water circulating cooling
Thanks for your order!
Questions, issues or concerns? I'd love to help you!