Free Shipping Some Special Links
Special Promotions Season 10% off above
Promotion Time (01.01-12.30)
Semi-automatic glue machine with high pressure air is set at a time, using the pedal switch control the liquid, launched. Flexible adjustment of manual, semiautomatic state, with high precision digital timing controller, precise control every time titration time, accurate to milliseconds, right to control the flow of liquid material, never waste liquid material. As long as adjust good air pressure, time, and the choice of appropriate needle tip, and easily change each note drops of quantity and note drops of time. Can solve many problems by gum, the use of simple, the operation is fast and easy to use, equipped with vacuum suction back to function, can control different viscosity, prevent LouDi, high efficiency, the rubber agreement. Not easily fatigue, without waste, a wide range of USES, products, complete can be based on user needs, with different sizes of the kind of needle tube, needle tip is best partner users.
Power supply: AC 220 V plus or minus 10% / frequency 50 Hz
AC 110 V plus or minus 10% / 60 Hz (internal conversion)
Power consumption: < 8 W
Air source: the biggest 0.99 MPa (clean no lubrication of dry air)
Spit out the pressure to adjust scope: 0.05 MPa–0.99 MPa
Time out adjusting range: can be adjusted DIP switch switch program
0.01 seconds-1 second; 0.1-10 seconds; 0.2-20 seconds; 0.3-30 seconds
Function mode: manual mode/semi-automatic mode (quantitative spit)
Vacuum back to suck function: adjustable negative pressure control to 600 millimeters of mercury
Repeat precision and spit out the frequency: precision: + 0.05% frequency: 600 / cent
The minimum amount out: 0.01 ml
Overall size: 235 mmx225mmx63mm
Weight: 2.2 kg
Digital timing table
The constant flow control valve CV 0.18 electromagnetic
Indicator light switch
Can adjust the town for up to 15 inches air suction/mercury (Hg)
Exquisite pedal switch
Could purchase all kinds of spare parts
It has two CaoZuoFa:
(a) to be automatic operation (auto) (applicable to quantitative, the timing glue)
The switch to transfer to the automatic auto position.
Adjust the air pressure and the quantity of cement, choose the right needle tip can control the flow of liquid material correctly.
Each trample a pedal switch, liquid material will set out according to the quantity of cement from tip to drop the hole.
(2) operated by hand (manual) (applicable to the qualitative, the timing glue)
The switch to transfer to the manual position.
Adjust the air pressure and choose the right needle tip.
On the pedal switch, liquid materials will be between the tip hole drops out, loosen the pedal switch liquid material stop drops out.
Thanks for your order!
Questions, issues or concerns? I'd love to help you!