Thanks for your order!

Engraving Drilling and Milling Machine USB LYBGACNC XC-30B

Introduction

The CNC router is suitble for Industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes.

The cnc router is designed for large area engraving work such as Industrial or Hobby Prototype Building, Building Model Making, PCB, Advertising Signs, Artwork, Crafts, Aircraft Models, RC Model parts, etc. So, you can do engraving work at office or home.

Model and Technical Parameters:

Thanks for your order!

Engraving Drilling and Milling Machine USB LYBGACNC 6040PL

Introduction

The CNC router is suitble for Industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes.

The cnc router is designed for large area engraving work such as Industrial or Hobby Prototype Building, Building Model Making, PCB, Advertising Signs, Artwork, Crafts, Aircraft Models, RC Model parts, etc. So, you can do engraving work at office or home.

Model and Technical Parameters:

Thanks for your order!

DIY LY drawbot pen drawing robot machine lettering corexy XY-plotter robot for drawing writing CNC V3 shield drawing toys

*This is simple DIY drawing robot, disassembled pack*

Parameter description:
Equipment Size: 490MM * 390MM * 70MM (L * W * H)
Engraving area: A4 paper
Power supply: 12V, 2A

Operation system: Win XP/Win7/Win10

Software: Inkscape, UGS

Packing List:

1, 1*uno controller

2, 1*CNC V3 shield

3, 2*A4988 stepper drive chip

4, 2* stepper motor

5, 1*9g Servo

6, 1*12V adapter

7, 1 set*acrylic parts

8, 1 set*2020 aluminum

9, 1 set screw and nut

10, 1 set bearing

11, printed parts

12, other parts

Application:

1. writing letters on the paper

2. writing letters on the gift bag or envelope.
3. Imitating a particular word

4. drawing

(RE: We will send customer software download link after order.)

Thanks for your order!

M3-M36 Tapping Machine Vertical Type Universal Electric Tapper Threading Machine

M3-M36 Electric tapping machine

Electric tapping machine is applicable to all machinery manufacturing industry, machine tool, mould machinery, plastic machinery, printing machinery, packaging machinery manufacturers, engineering machinery, automobile motorcycle parts, aviation engines, rolling stock, tobacco machinery and general machinery and other industries.

Electric tapping machine for workpiece materials: electric tapping machine can be in the lead, copper, A3 steel, cast iron, cast iron, Q235, 45#steel, S136 steel, 718 steel, ace, NAK80 die steel and other metal materials for easy tapping operations.

Machine features:

1.The tapping motor of the tapping machine is balanced and perpendicular to the suspension support frame, which can keep the tapping motor moving to any position and can be kept perpendicular to the workbench.

2.The tap of the tapping machine is equipped with overload protection device. With the clamping head of overload protection device, the safety clutch can be adjusted when the tapping exceeds the rated torque, and can avoid damage to the tap.

The machine can be used in single-phase 220V power supply.

3. It has the advantage of high cost performance, lower price and more function than the domestic and international model machines, and many inventions surpass other brands.

4. Advanced mechanical design, all kinds of processes are used in moulding production, with low cost and beautiful appearance.

5. Simple and flexible operation, able to quickly locate and accurately process complicated and bulky work.

6. Can (optional) universal head, the work head can adjust at any Angle, vertical, horizontal, lateral, high and low can tap the silk.

7. The taper sleeve has an overload protection device to ensure that it does not damage the tap, the load balance in the tapping process, the high precision of the screw processing, and the protection of the torsion force.

8. Infinitely variable speed, can adjust any speed, the speed can be set on the controller.

9.manual, automatic and gap three modes of work are your choice.

10.Automatic mode can control the tapping depth effectively, without operation button, it is controlled automatically by the depth controller.

11. Rapid positioning, quick tapping speed and high production efficiency.

12.Servo drive control, overcome the limitations of pneumatic tapping machine, lathe, drilling machine or manual tapping machine.

Details:

1.Equipped with high speed servo motor, the maximum speed can reach 5000 revolutions per minute. Stable performance and long life.

​2.Super wear-resistant planetary reducer, stable performance, low noise. Average life is 20000 hours, noise is less than 60DB. Lubrication: long acting grease. Protection level: 1P65.

3.The right handle handle design, can use the thumb to control the speed switch (ergonomic design), flexible, smooth.

4.Detachable handle on the left, hands operating on the head, positioning is more flexible, accurate and fast.

​5.Tapping machine chuck, (switching clip).

Parameters:

Model:  M3-M16 Vertical

Voltage: 220V

Motor Power: 600W

Electric current: 50HZ/60HZ

Spindle speed: 0-312/RPM

Working radius: 1000mm

Working angle: Vertical type

Chuck type: M3 M4 M5 M6/8 M10 M12 M14 M16

Control panel: Touch screen

Tap capacity: M3-M16

Packing size: 65CM*61CM*22CM

Weight: 35kg

Model:  M3-M16 Universal

Voltage: 220V

Motor Power: 600W

Electric current: 50HZ/60HZ

Spindle speed: 0-312/RPM

Working radius: 1000mm

Working angle: Universal type

Chuck type: M3 M4 M5 M6/8 M10 M12 M14 M16

Control panel: Touch screen

Tap capacity: M3-M16

Packing size: 65CM*61CM*22CM

Weight: 35kg

Model:  M6-M24 Vertical

Voltage: 220V

Motor Power: 1200W

Electric current: 50HZ/60HZ

Spindle speed: 0-200/RPM

Working radius: 1200mm

Working angle: Vertical type

Chuck type: M6/8 M10 M12 M14 M16 M18/20 M22 M24

Control panel: Touch screen

Tap capacity: M6-M24

Packing size: 70CM*65CM*25CM

Weight: 50kg

Model:  M6-M24 Universal

Voltage: 220V

Motor Power: 1200W

Electric current: 50HZ/60HZ

Spindle speed: 0-200/RPM

Working radius: 1200mm

Working angle: Universal type

Chuck type: M6/8 M10 M12 M14 M16 M18/20 M22 M24

Control panel: Touch screen

Tap capacity: M6-M24

Packing size: 70CM*65CM*25CM

Weight: 50kg

Model:  M6-M36 Vertical

Voltage: 220V

Motor Power: 1200W

Electric current: 50HZ/60HZ

Spindle speed: 0-150/RPM

Working radius: 1250mm

Working angle: Vertical type

Chuck type:  M6/8 M10 M12 M14 M16 M18/20 M22 M24 M30 M36

Control panel: Touch screen

Tap capacity: M6-M36

Packing size: 75CM*70CM*30CM

Weight: 55kg

Model:  M6-M36 Universal

Voltage: 220V

Motor Power: 1200W

Electric current: 50HZ/60HZ

Spindle speed: 0-150/RPM

Working radius: 1250mm

Working angle: Universal type

Chuck type:  M6/8 M10 M12 M14 M16 M18/20 M22 M24 M30 M36

Control panel: Touch screen

Tap capacity: M6-M36

Packing size: 75CM*70CM*30CM

Weight: 55kg

Warm tips:

The tapping machine does not contain bottom mounting table

Because mounting table is made of cast iron, very heavy, freight is very expensive,

so we suggest that customer can make it by themself or buy it in local

Thank you very much!

Thanks for your order!

CNC Router /Engraving Drilling and Milling Machine

Introduction

This is a very good era,in the past we only can see the CNC machine equipment in factory, but now, the CNC equipment has been into our lives;

Whether you are a small or medium enterprises managers, project engineers, CNC enthusiast or artists, related students, there are something on this machine will attract you;

It can help you processing a lot of parts, whether you are modeling or home decoration or creative DIY.

It can help you intuitively to learn CNC knowledge. And testing learning outcomes in real time.

Warranty

More Precise Stepping Motor

Simple operation and installation

1 year machine part and 6 months electrical parts、stepping motor、spindle Free Warranty

Model and Technical Parameters

Thanks for your order!

M2-M30 Tapping Machine Vertical Type Universal Electric Tapper Threading Machine

M2-M30 Electric tapping machine

Electric tapping machine is applicable to all machinery manufacturing industry, machine tool, mould machinery, plastic machinery, printing machinery, packaging machinery manufacturers, engineering machinery, automobile motorcycle parts, aviation engines, rolling stock, tobacco machinery and general machinery and other industries.

Electric tapping machine for workpiece materials: electric tapping machine can be in the lead, copper, A3 steel, cast iron, cast iron, Q235, 45#steel, S136 steel, 718 steel, ace, NAK80 die steel and other metal materials for easy tapping operations.

Machine features:

1.The tapping motor of the tapping machine is balanced and perpendicular to the suspension support frame, which can keep the tapping motor moving to any position and can be kept perpendicular to the workbench.

2.The tap of the tapping machine is equipped with overload protection device. With the clamping head of overload protection device, the safety clutch can be adjusted when the tapping exceeds the rated torque, and can avoid damage to the tap.

The machine can be used in single-phase 220V power supply.

3. It has the advantage of high cost performance, lower price and more function than the domestic and international model machines, and many inventions surpass other brands.

4. Advanced mechanical design, all kinds of processes are used in moulding production, with low cost and beautiful appearance.

5. Simple and flexible operation, able to quickly locate and accurately process complicated and bulky work.

6. Can (optional) universal head, the work head can adjust at any Angle, vertical, horizontal, lateral, high and low can tap the silk.

7. The taper sleeve has an overload protection device to ensure that it does not damage the tap, the load balance in the tapping process, the high precision of the screw processing, and the protection of the torsion force.

8. Infinitely variable speed, can adjust any speed, the speed can be set on the controller.

9.manual, automatic and gap three modes of work are your choice.

10.Automatic mode can control the tapping depth effectively, without operation button, it is controlled automatically by the depth controller.

11. Rapid positioning, quick tapping speed and high production efficiency.

12.Servo drive control, overcome the limitations of pneumatic tapping machine, lathe, drilling machine or manual tapping machine.

Details:

1.Equipped with high speed servo motor, the maximum speed can reach 5000 revolutions per minute. Stable performance and long life.

​2.Super wear-resistant planetary reducer, stable performance, low noise. Average life is 20000 hours, noise is less than 60DB. Lubrication: long acting grease. Protection level: 1P65.

3.The right handle handle design, can use the thumb to control the speed switch (ergonomic design), flexible, smooth.

4.Detachable handle on the left, hands operating on the head, positioning is more flexible, accurate and fast.

​5.Tapping machine chuck, (switching clip).

Parameters:

Model:  8KV Vertical

Voltage: 220V

Motor Power: 600W

Electric current: 50HZ/60HZ

Spindle speed: 0-1000/RPM

Working radius: 1100mm

Working angle: Vertical type

Chuck type: M2 M3 M4 M5 M6/8 (Torque chuck)

Control panel: Touch screen

Tap capacity: M2-M8

Packing size: 65CM*61CM*22CM

Weight: 35kg

Model:  8KV Universal

Voltage: 220V

Motor Power: 600W

Electric current: 50HZ/60HZ

Spindle speed: 0-1000/RPM

Working radius: 1100mm

Working angle: Universal type

Chuck type: M2 M3 M4 M5 M6/8 (Torque chuck)

Control panel: Touch screen

Tap capacity: M2-M8

Packing size: 65CM*61CM*22CM

Weight: 35kg

Model:  16KV Vertical

Voltage: 220V

Motor Power: 600W

Electric current: 50HZ/60HZ

Spindle speed: 0-312/RPM

Working radius: 1100mm

Working angle: Vertical type

Chuck type: M3 M4 M5 M6/8 M10 M12 M14 M16 (Torque chuck)

Control panel: Touch screen

Tap capacity: M3-M16

Packing size: 65CM*61CM*22CM

Weight: 35kg

Model:  16KV Universal

Voltage: 220V

Motor Power: 600W

Electric current: 50HZ/60HZ

Spindle speed: 0-312/RPM

Working radius: 1100mm

Working angle: Universal type

Chuck type: M3 M4 M5 M6/8 M10 M12 M14 M16 (Torque chuck)

Control panel: Touch screen

Tap capacity: M3-M16

Packing size: 65CM*61CM*22CM

Weight: 35kg

Model:  30KV Vertical

Voltage: 220V

Motor Power: 1200W

Electric current: 50HZ/60HZ

Spindle speed: 0-200/RPM

Working radius: 1200mm

Working angle: Vertical type

Chuck type:  M6/8 M10 M12 M14 M16 M18/20 M22 M24 M30

Control panel: Touch screen

Tap capacity: M6-M30

Packing size: 75CM*70CM*30CM

Weight: 55kg

Model:  30KV Universal

Voltage: 220V

Motor Power: 1200W

Electric current: 50HZ/60HZ

Spindle speed: 0-200/RPM

Working radius: 1200mm

Working angle: Universal type

Chuck type:  M6/8 M10 M12 M14 M16 M18/20 M22 M24 M30

Control panel: Touch screen

Tap capacity: M6-M30

Packing size: 75CM*70CM*30CM

Weight: 55kg

Warm tips:

The tapping machine does not contain bottom mounting table

Because mounting table is made of cast iron, very heavy, freight is very expensive,

so we suggest that customer can make it by themself or buy it in local

Thank you very much!

Thanks for your order!

Portable lithium Portable engraving Hand-held electric marking machine 100*30 130x30mm touch screen for Nameplate Cylinder number Frame Chassis number Plotter

Hand-held lithium battery electric touch-screen marking machine

Parameters:

Mold: LY-30E (electric)

Marking range: 100*30mm or 130*30mm

Marking depth: 0.1-0.8mm

Equipment size: 175*120*270mm /205*120*270mm

Applicable: applied to various artifacts, truck Large Vehicle Chassis number frames, engines, etc.

Thanks for your order!

l  Specification:

Model: TL110-15-130 A (B)

Chuck: K11-130MM three-jaw centering chuck

Center height: 110MM

Reduction box: High precision roller cam reduction (precision 1 arc minute)

Total height: 175MM

Speed reduction ratio: 15:1

Through-hole diameter: 25MM

Motor: can be installed servo 200W or 400W motor

Accessories: one pair of total counterclaw and wrench

Size: length 260MM*width 130*height 175MM

Weight: 12KG

l  CNC Indexing Head Control Box Specifications:

1. Model: KME8030

2. Input voltage: AC110~220V

3. Power: Maximum 300W

4. Equal parts mode: 1~360 equal parts

5. Angle mode: 1 ~ 49 any angle (0.1 degrees / step)

6. Orientation: can be forward and reverse

7. Stepping motor: applicable to two-phase 4-wire stepping motor (current maximum 4.5A)

8. Reduction ratio: applicable to 1~999:1

9. Outer box size: 270*140*210MM

10. Weight: 3.5KG

Thanks for your order!

Video:

https://youtube.com/shorts/KtPIee3wgwk?feature=share

https://youtube.com/shorts/9dAhiFmqefM?feature=share

https://youtube.com/shorts/qqkdv-b1g5M?feature=share

https://youtube.com/shorts/wzxEB49nY4k?feature=share

https://youtube.com/shorts/OF6SHeK0RZA?feature=share

https://youtube.com/shorts/fhXWY_DTeYs?feature=share

https://youtube.com/shorts/a-L6utc-ii4?feature=share

https://youtube.com/shorts/2vEJGug3y5Y?feature=share

More videos:

1.Width adjust:

https://youtu.be/EVtwj4iNvs4

2. English version installation1

https://youtu.be/gdr8nKk7zC0

3. English Software installation2

https://youtu.be/b3tCMwiF_jM

4.Writing

https://youtu.be/NUVJDCJwbPI

Package: Carton

A4 Model 1

A4 Model 2

A4 Model 3

Optionals:

Model 1 ：A4 Paper Auto-Feed Function ( Basic version)

Model 2 ：A4 Auto-Feed + Manual Page-Turning Notebook Function ( With notebook jig. Need manual page flipping)

Model 3 ：Supports automatic paper size changeable for A4, A5, B5, and other smaller sizes than A4.

(Support off-line control. Support APP. Supports Android phones, but can only write single page by APP, not support Apple phones, it is best to use a computer. Mobile phone operations have certain limitations, and can only write horizontal grid books, such as lesson plans with large and small grids, which are not supported. In addition, mobile phones do not have stable computer connections, multiple functions, and convenient layout. When controlling the machine with a mobile phone, it must be placed next to the machine, and cannot switch pages, black screens, make or receive calls, or switch software )

Scene Description

Take Notes

Compose Essays

Write Lesson Plans

Fill Out Forms

Draw and Paint

Write in English

Product Advantages

Automatic Paper Change

Automatic Line Spacing Calculation

Random Vertical Fluctuation

Random Font Deformation

Automatic Line Break

Automatic Stop

Random Stroke Deformation

Automatic Connection

Arbitrary Placement of Initial Characters

Multiple Connection Methods

Direct USB Cable Connection

Wireless Wi-Fi Connection

Wireless Bluetooth Connection ( Version 3 Support)

Storage Card for Offline Access( Version 3 Support)

Product Features

Create Personal Fonts via Photo Capture

Input Personal Fonts via App

Directly Use Built-in Fonts

Capture Photos for Artistic Signature Tracing

Thanks for your order!

Single Head Double Head Leather Machine Belt Cutter Strap Cutting Machine Edge Folding Laminating Machine Leather craft Slicer 220V 110V

220V 110V Professional Leather Slitting Machine Leather Slitter Shoe Bags Straight Paper Cutter Vegetable Tanned Leather Splitter

Small leather cutting machine slitting machine shoe bags straight cut paper products Vegetable tanned leather slicer

Application：

This product is suitable for leather shoes, bags, handicrafts and other leather goods cut straight, It can also be cut paper products.

Cutting thickness: For soft leather, it can cut 6mm thick. For hard leather, it can cut 3mm thick.

Suitable for soft leather thickness less than 3mm, width between 0-80mm

Packing list:

1. Leather Machine X 1 unit

2. Cutting blade X 5 units

3. 1mm pad X 10 units

4. 2mm pad X 10 units

5. 5mm pad X 6 units

6. 10mm pad X 6 units

7. Allen key X 3 units

8. Wrench X 1 units

9. Pull cylinder X 1 units

10. Plastic roll holder X 1 units

Maintenance

1, the lubrication hole filling oil regularly, prevent the rotation axis of normal lubrication and wear or killed.

2, should pay attention to safety when using, do not reach out her hand to the blade when the machine is turning.

3, use for a long time that the condition of the rod nylon washer, serious breakage of workpiece in cutting burr should beoff work at this time, open beside cover board, use special wrench to loosen the nut, loose screws, unload swinging rod. Pull the nylon washer, with the changing location method, nylon ring again.

4, if users need special cutting width of the workpiece, can be made to our various types of special gasket.

5, power supply should be safety grounding, ensure no leakage phenomenon.

6, with the pull cylinder and Edge Folding Finish Function. mean edge 20mm folding to 10mm.

Thanks for your order!

Video:

https://youtube.com/shorts/KtPIee3wgwk?feature=share

https://youtube.com/shorts/9dAhiFmqefM?feature=share

https://youtube.com/shorts/qqkdv-b1g5M?feature=share

https://youtube.com/shorts/wzxEB49nY4k?feature=share

https://youtube.com/shorts/OF6SHeK0RZA?feature=share

https://youtube.com/shorts/fhXWY_DTeYs?feature=share

https://youtube.com/shorts/a-L6utc-ii4?feature=share

https://youtube.com/shorts/2vEJGug3y5Y?feature=share

Package: Carton

A3 Parameters

Scene Description

Take Notes

Compose Essays

Write Lesson Plans

Fill Out Forms

Draw and Paint

Write in English

Product Advantages

Automatic Paper Change

Automatic Line Spacing Calculation

Random Vertical Fluctuation

Random Font Deformation

Automatic Line Break

Automatic Stop

Random Stroke Deformation

Automatic Connection

Arbitrary Placement of Initial Characters

Multiple Connection Methods

Wireless Wi-Fi Connection

Wireless Bluetooth Connection

Direct USB Cable Connection

Storage Card for Offline Access

Product Features

Create Personal Fonts via Photo Capture

Input Personal Fonts via App

Directly Use Built-in Fonts

Capture Photos for Artistic Signature Tracing

Thanks for your order!

Video:

https://youtube.com/shorts/KtPIee3wgwk?feature=share

https://youtube.com/shorts/9dAhiFmqefM?feature=share

https://youtube.com/shorts/qqkdv-b1g5M?feature=share

https://youtube.com/shorts/wzxEB49nY4k?feature=share

https://youtube.com/shorts/OF6SHeK0RZA?feature=share

https://youtube.com/shorts/fhXWY_DTeYs?feature=share

https://youtube.com/shorts/a-L6utc-ii4?feature=share

https://youtube.com/shorts/2vEJGug3y5Y?feature=share

More videos:

1.Width adjust:

https://youtu.be/EVtwj4iNvs4

2. English version installation1

https://youtu.be/gdr8nKk7zC0

3. English Software installation2

https://youtu.be/b3tCMwiF_jM

4.Writing

https://youtu.be/NUVJDCJwbPI

Package: Carton

A4 Model 1

A4 Model 2

A4 Model 3

Optionals:

Model 1 ：A4 Paper Auto-Feed Function ( Basic version)

Model 2 ：A4 Auto-Feed + Manual Page-Turning Notebook Function ( With notebook jig. Need manual page flipping)

Model 3 ：Supports automatic paper size changeable for A4, A5, B5, and other smaller sizes than A4.

(Support off-line control. Support APP. Supports Android phones, but can only write single page by APP, not support Apple phones, it is best to use a computer. Mobile phone operations have certain limitations, and can only write horizontal grid books, such as lesson plans with large and small grids, which are not supported. In addition, mobile phones do not have stable computer connections, multiple functions, and convenient layout. When controlling the machine with a mobile phone, it must be placed next to the machine, and cannot switch pages, black screens, make or receive calls, or switch software )

Scene Description

Take Notes

Compose Essays

Write Lesson Plans

Fill Out Forms

Draw and Paint

Write in English

Product Advantages

Automatic Paper Change

Automatic Line Spacing Calculation

Random Vertical Fluctuation

Random Font Deformation

Automatic Line Break

Automatic Stop

Random Stroke Deformation

Automatic Connection

Arbitrary Placement of Initial Characters

Multiple Connection Methods

Direct USB Cable Connection

Wireless Wi-Fi Connection

Wireless Bluetooth Connection ( Version 3 Support)

Storage Card for Offline Access( Version 3 Support)

Product Features

Create Personal Fonts via Photo Capture

Input Personal Fonts via App

Directly Use Built-in Fonts

Capture Photos for Artistic Signature Tracing

Thanks for your order!

Application area:Couplet,ribbon,leather,pressbooks,invitation card,greeting card,non-wovenbags.

Main Features:

    1.No need to make dies & plates ,cost-efficient and time-saving.

    2.360mm feeding width.

   3.Computer directly print to reduce printing cost.

   4.300dpi high resolution to make artworks more clearly.

   5.Roll material can be printed automatically.

   6.Smooth or unsmooth material can be printed.

   7.Speed can be adjusted freely according to different materials or artworks..

   8.Support windows main software :Coredraw,AI,Photoshop,PDF etc.

   9.Multi-color are available, such as gold, sliver, and other colors.

Technical Parameter

Computer system  Windows system

Design software    CorelDRAW, Adobe llustrator, etc.

Connection interface   USB

Max. material width    35cm, A3 plus

Max. material thickness    600 grams

Max. printing width       30cm

Printing speed

About 240 pcs one hour

 ( full printing on A3 paper for example )

Printer resolution      300dpi

Lifetime of printing head

150,000 meters, means printer can use

about 3000 rolls foil if one roll 50m long

Power & Voltage    400W, 100-240V as customer’s needed

Warranty

3 months for printing head

1 year for other parts of printer.

Packing size

74cm * 46cm * 34cm, 0.12CBM

G.W. & N.W.

22kg，21kg

Machine:   LY 400D hot foil printer  

  1.LY 400D ribbon foil printer does not need any dies, plates or ink, only consuming foils. It enables you to print personalized design for your customers in an instant. Moreover, LY 400D ribbon foil printer has two interface ways—-PC and U flash. It prints roll material automatically and has no limit for print length .

Why Choose Us

We are the factory—-the advantage of choosing factory.
1. Better Price
As a factory, you can do business directly with us. It saves the profits of trading company. The price will be much better and favorable.
2. Better quality
We have quality inspection during processing to ensure the quality of the product
3. Better service
We have our own professional sellers and after sales service team. We can supply the better professional service for you.
4. More Flexible
We have our own design team, and we can design and manufacture any kind of machine and auto matic product line as customers’ requirement.
5. More Professional
We have more than 20 years of experience on the machines. We can design and manufacture the machine just as your sample products.
6. Honesty and trustworthiness
We have exported the machines more than 10 years. There is no one trade dispute. And many customers place order many times

 
We are looking for worldwide agents.if you have interest,do not hesitate to contact us !

Thanks for your order!

Vertical Magnetic Tensioner

This product generates frictionless resistance by converting torque through a magnetic field, ensuring stable tension It features a novel anti-jump wire structure and a smooth wire-feeding system, ensuring that wire jams are completely eliminated. The vertical design allows for the installation of long-arm tension rods, enabling a wide swing range for the counter-tension rod and a longer wire-winding length. Additionally, the installation method of the wire break detection device has been improved, significantly extending the service life. With a wide tension range, it accommodates winding of various wire diameters, thereby reducing costs.

Product Specifications

Technical Specifications (Taking enameled wire as an example)

Precautions for Use:

1. The optimal operating condition is when the tension rod is parallel to the top surface of the housing. A suitable operating angle may also be used according to user requirements; however, during operation, the tension rod must not rise above the red mark on the housing surface.

2. During operation, tension may only be increased from a low setting; it must not be decreased from a high setting. When it is necessary to reduce tension from a high setting, adjustments must be made while the machine is stopped to prevent thread breakage.

3. If tension pulsation occurs during adjustment, stop the machine, turn the tension adjustment knob clockwise to the maximum tension setting, then slowly return it to the desired tension level and readjust.

4. After completing the adjustment and resuming operation, if the working angle of the tension rod is the same as the angle during static installation, be sure to readjust the tension to prevent abnormal wear on the tensioner components, which could shorten its service life.

Thanks for your order!

Parameters

Features

The electronic tension controller enables closed-loop tension control and automatic compensation. It regulates tension via the excitation current, ensuring high control accuracy. This product features built-in tension stabilization, meaning tension remains unaffected by speed, the wire cover, tension rods, or pulleys.

Model Description

DZ: Electronic tensioner

CF: Indicates no real-time tension display (low)

CCF: Indicates no real-time tension display (medium)

CCCF: Indicates no real-time tension display (high)

XA: Indicates real-time tension display (optional 485 functionality)

Number “8000”: Indicates maximum tension value

Thanks for your order!

PVC Card Book Leather Paper Wood Custom Logo Embossing pneumatic Hot Foil Stamping Machine Heat Press Machine with Hot Stamping Foil gilded paper HS foil

The newly upgraded hot foil stamping machine is made of stainless steel and aluminum alloy, durable and reliable. With paper holder, digital panel, base plate with scale and positioning slider, the bronzing machine is easy to operate and use

Equipped with a  large hot press board, the height range of the stroke is adjustable(maximum 22cm/8.66 inch). The temperature is steady and features 0-280℃ range free setting. It is a perfect tool for stamping!

Details

【TEMPERATURE ADJUSTMENT】

Temperature is 0-280℃ adjustable, displayed on one LCD panel, externally equipped with a water & dust proof painted shell for long-term use.

【CONVENIENT OPERATION】

Prode a 5x7cm (1.97×2.76 inch)/  8x10cm (3.15×3.94 inch) /  10x13cm (3.94×5.12 inch)  hot press board, bronzing paper holder and non-slip handle for convenient operation. The newly-designed U-shaped mold hole can be applied to more kinds of brass molds.

【RELIABILITY & SAFETY】

The switch and fuses on the back ensure the security of hot foil stamping. The temperature control is integrated with circuit board for higher safety factor.

【PRECISE POSITIONING】

Equipped with aluminum plate base with full scale and bakelite positioning slider, able to realize the precise placement of the stamping material.

【DIVERSE MATERIAL】

Can be applied to leather, wood, PU,PVC, paper, plastic,etc. (for gold stamping or hot stamping); and wood, leaves, bread, etc. (for hot stamping)

Thanks for your order!

Hand-held Portable metal signage nameplate marking machine touch-screen Electric Pneumatic Lettering Machine 170x110mm for metal parts nameplate

Portable pneumatic marking machine

Parameters:

Mold: LY-170-P (Pneumatic)

Marking range: 170* 110mm

Applicable: applied to various artifacts, truck Large Vehicle Chassis number frames, engines, etc.

Marking depth: 0.01-1mm

Equipment size: 28*30*24cm

Customer preparation: computer and air compressor

Thanks for your order!

This model maybe the cheapest 2 zones infrared bga rework station,if you are new bie,or have limited budget,you can consider of this model.

The parameters and performance indicators:

1. The rework station suitable for notebook computer motherboard, desktop computer motherboards, computer and server motherboard, motherboard, motherboard, large game machines, communications equipment, motherboards, LCD TV motherboard, motherboard, print circuit board repair.

2. The BGA chips rework station can be very effective in replacing the stack memory, the replacement of the BGA chip, memory below will not take slurry.

3. The rework station can be very successful in solving BGA chip heated foaming problem. (constant temperature 100 degrees available preheating.

4. Preheat to repair the motherboard 1-2 minutes. Then heating.

5. The rework station can replace CPU notebook memory slot to facilitate the.

6. BGA chip to be an easy job to replace glue sealing, sealing glue chip to the rubber (hot-air or in addition to adhesive glue).

7. The replacement of the BGA chip, the circuit board can not turn yellow.

8. The rework station using infrared preheating and infrared heating, lower preheating station, PCB board for preheating, ensure that the PCB plate can not be deformed, preheating station area of 245*180. Can fully meet the desktop and notebook computer repair.

9. Rational design of support structure, the replacement of the BGA chip is not deformation, very convenient and practical.

10. The rework station can do circuit board drying and circuit board shaping.

The rework station welding success rate is almost 99%, if can’t achieve this goal, probably because of the new machine, please try it a few times.

Rework station operations guide:

1, the motherboard in the preheating stage, the board fixed bracket.

2, the welding joint alignment chip from the chip 10MM, welding head, with a chip on the temperature probe.

3, open the preheat switch, to lead the chip preheating temperature set at 280 degrees, to preheat the motherboard, the motherboard preheating time needed for more than ten minutes, then open the welding joint, the welding of the chip, the upper temperature controller temperature set to 220 degrees (three temperature zones lead-free please refer to the following temperature open the settings) welding welding switch as long as 150 seconds to complete chip.

4, close the heating switch, a lower preheating switch, remove the welding head to the motherboard, after cooling, can move the motherboard.

5, open the cross-flow fan, heat dissipation on the motherboard, about heat about 2 minutes can remove the motherboard, power off.

Have the relevant knowledge and welding:

How much is the lead solder and lead-free solder melting point respectively?

Lead solder melting point of 183 degrees, lead-free solder melting point of 217 degrees

Cannot determine the board is a lead or lead-free, how to set the temperature?

According to lead to set temperature, heating is completed, use tweezers to gently touch the BGA chip, if the chip can move smoothly, said welding success, if the chip can’t move, said solder may be lead-free, set the temperature for lead-free, heating is completed, the same use tweezers to touch, in order to confirm whether the welding success, also can look at capacitance bridge near, if the two are more lead-free tin solder, tin lead less, the general new machines are almost lead, INTEL chip with FW is a lead, take NH lead-free lead-free than about a lead temperature 20 degrees, VIA chip with a G lead-free, has lead to melting point of 183 degrees, unleaded melting point of 217 degrees, can be distinguished through the spot color, lead solder joints with a shiny, lead a partial white

metal feeling gloss is not good, there is a judgment about the ways of looking at models, the new machine are all lead-free soldering (considered from the environmental point of view, in addition to do) when lead-free bridge suggest you mask slightly more, because of the mobility of lead-free and invasive are poor, not easy to repair.

6. Series chip set up basic are lead-free, judgment can be started from several aspects of solder joints, gloss, lead-free solder paste because of high melting point, during the reflow process oxidation than lead hard, easy to lose their luster, but time lead long gloss will decline. See chip sets, with N or NH as the lead, but I think, Toshiba some previous original board, although the chipset is a lead, but PCB should still lead. Look at the screw holes, lead-free generally not tin, but not absolutely. See the ICT test point, lead is flat, lead-free tend to drum up a little. There are many aspects can be distinguished, this is not the only one.

Solder paste plays what role?

Solder paste can clear the pad surface oxide, enhanced the activity of solder.

Hot air heating and infrared heating what is the difference?

For BGA rework station hot air heating, air flow, the shift may lead to components. The air flow, resulting in hot air can not be directly heated BGA chip and solder ball, otherwise the ball may stick together (part of the direct heating type steel mesh can be used).

In addition to control temperature, but also control the volume, so the BGA rework station hot air heating is often more complex structure, huge volume.

Hot air type BGA rework station need step heating, temperature parameter setting complex, users have to master the 100-200 temperature curve, a different board should have different temperature curve, the selection of a suitable set of from different temperature curve, for beginners may be more difficult.

Hot air type BGA rework station must be connected to the computer, can guarantee higher work efficiency. Hot air rework station on the circuit board position requirements higher, BGA chip to be very accurate alignment of the wind mouth, if the circuit board and BGA chips dislocation, will cause the welding failure.

Infrared heating is a new technology developed in recent years, infrared heating BGA rework station has the advantages of simple structure, accurate temperature control, easy to operate.

There are two reasons for the circuit board deformation:

First, is the preheating area is too small, the circuit board is not uniformly heated;

Secondly, the circuit board placing unreasonable, not smooth, without locking.

How to solve the problem of false?

Can be directly welded. The f

irst to chip into the amount of flux or pine, then heating.

If welding is not successful, will need to take down the redo BGA chip.

How will the pad alignment of BGA chip and the circuit board?

There are corresponding to the BGA chip line on the circuit board, the BGA chip and the frame alignment can be placed.

For the ball more than 0.65mm spacing of BGA chip, the direct use of manual alignment can be, without the need for optical equipment with the help of professional. Such as notebook computer board, desktop computer motherboards, computer boards, server board, large and medium-sized game board

For BGA chip underfill encapsulant below 0.5mm, often need to resort to the accurate alignment of optical devices. For example, LED lamp.

Notebook computer pad spacing have how old?

Solder ball notebook computer is how much?

Pad spacing notebook computer has three kinds: 1.27mm 1mm 0.8mm

Solder ball notebook computer application has three kinds: 0.76mm 0.6mm 0.5mm

The spacing of 1.27mm chip using 0.76mm solder ball

The spacing of 1mm chip using 0.6mm solder ball

The spacing of 0.8mm chip using 0.5mm solder ball

X machine can detect the BGA chip is welded with?

X machine can accurately determine the fault solder adhesion.

For the problem of weld, X machine can not accurately judge.

For the chip overheating damage problem, X machine can not judge.

X machine in the price between 20-100 million.

To accurately determine whether the success of the most accurate way of welding is a functional test. Also is the power-on test circuit board can work normally.

What is the infrared heating?

Infrared ray is a ray of sun many invisible light, is located outside the red light, so called infrared. In the spectrum of wavelengths from a period of 0.76 to 400 microns called infrared, infrared thermal effect.

Infrared heating dazzling?

Infrared is not visible light, infrared not glare. Glare is often the incandescent lamp.

The use of small electronic products mobile phone, digital camera, BGA chip size is very small, pads on the chip is small, spacing pad is small, easy to solder tin slurry forming to the BGA chip, more appropriate.

BGA chip used in computer, game machine, computer, LCD TV and other large circuit board often size is large, the chip pad, pad spacing is very large, in order to ensure the forming the ball size uniform, with the ball better.

Temperature setting method· temperature control table has two rows of digital tube, the top line PV is the display of the measured temperature, the following line SV is the display of set temperature.

· digital tube left with four indicating lamps, AL

jiangmaolin (18:55:44):

M1 alarm, OUT alarm is heating, AKM2, AT correction.

Through the digital tube below a row of four buttons. From left to right: set key, the left key, down the direction key, key upward direction.

· set the temperature of the following methods:

Hold down the SET key to more than one second (no more than 2 seconds), the top line of digital tube display SO, and a line of digital tube display settings, and set the value of one flickers.

Through the press direction key to digit switching digital tube.

According to the above key or keys to downward, can increase or decrease the value.

After the completion of the set, press SFT second to return.

· Hessian rework station temperature sensor has direct contact with the circuit board, circuit board chip sensor detects the temperature.

· part of electrolytic capacitor plastic socket cannot resist high temperature, to prevent the high temperature bake bad, please adhered on the surface of the insulation sheet.

· paste coated evenly, not painted too much, too much solder paste may cause weld.

· use knife head iron performance good scraping residual solder pads, be careful of tin, the provision of free to rub off the pad on the PCB board, pad most would be the normal work of a circuit board.

· circuit board welding to cold to room temperature before power-on test.

· PCB in addition to tin, please clean, pad to light, otherwise may not stick solder, lead solder.

The sensitivity of · the rework station the configuration of the sensor is very high, the air flow will lead to a digital display of temperature jump, jump in the rate is a normal phenomenon in +-5 degree. Reduce the air flow can effectively reduce the digital display of the jump value.

· solder melting, BGA chip will be in a floating state, can use tweezers touch detection, temperature did not accurately regulator before test, application of vacuum suction pen, when only a small amount of pad can not fully melting, vacuum suction pen may lead to pad off.

· board or BGA chip if too wet, want to dry before they can use, damp circuit board or chip after heating may burst, may hear a popping sound work process.

· modify the temperature parameter, the bad old motherboard on rework station, heating one or more complete workflow, use tweezers to gently touch the BGA chip, if the chip can move smoothly, show that the fully molten solder. Work process before the end of 20 seconds is appropriate if the melting solder, solder melting before too long, recommended temperature appropriate reduction, in order to prevent edge weld or high temperature damage the chip solder ahead of schedule, if too short, recommended temperature adjustable high, to prevent air welding.

The BGA chip is stuck insulating tape, may affect the heat transfer, resulting in the process after the end, solder still can not melting, with longer heating time, can solve this problem.

Warranty regulations and precautions:

· from the date of purchase. This product Neibao returned a week, one year free warranty, one year after the repair only charge the cost of materials.

· if the user did not inform our circumstances to cause for disassembly and circuit is modified, not within the scope of the warranty.

· if user errors such as reasons not to return.

· the equipment is not waterproof, no water or wet.

· the machine working voltage is 220V, please do not use non 220V power supply mode.

· the use of this equipment, to ensure its effective ground, to prevent leakage.

· the equipment work, preheating and heating head in a high temperature state, this site can not contact with the skin, to prevent burns.

· do not close to the welding head temperature control instrument, otherwise it will burn Wen Kongyi

Disclaimer:

The master of this machine, please users to wear the old circuit board exercise machine operation process. Otherwise, the machine’s operation as improper use, the resulting loss alone by the user, because the work environment is different, set the parameters of heating temperature will change a little, ask users to regularly adjust the temperature parameters, results in debug prevail, so as to maximize the efficiency.

Note: the above is only for reference, because the specific use, and the motherboard, chip. And the environment, have a relationship, so the flexible key, if can not solve the problem please contact us, we have professional engineers to provide guidance.

metal feeling gloss is not good, there is a judgment about the ways of looking at models, the new machine are all lead-free soldering (considered from the environmental point of view, in addition to do) when lead-free bridge suggest you mask slightly more, because of the mobility of lead-free and invasive are poor, not easy to repair.

6. Series chip set up basic are lead-free, judgment can be started from several aspects of solder joints, gloss, lead-free solder paste because of high melting point, during the reflow process oxidation than lead hard, easy to lose their luster, but time lead long gloss will decline. See chip sets, with N or NH as the lead, but I think, Toshiba some previous original board, although the chipset is a lead, but PCB should still lead. Look at the screw holes, lead-free generally not tin, but not absolutely. See the ICT test point, lead is flat, lead-free tend to drum up a little. There are many aspects can be distinguished, this is not the only one.

Solder paste plays what role?

Solder paste can clear the pad surface oxide, enhanced the activity of solder.

Specifications:

01. Applicable to laptop motherboard, desktop motherboard, XBOX-360, server motherboard, digital products etc..

02. Two heating zones, independant heating, upper heating 300W, bottom preheating 1600W

03. Maximum heating temperature : 500 degree

04. Used high accurate Intelligent temperature controller, make more accurate temperature controlling

05. Movable heater, easy and convinient to use

06. Infrared heating panel, independant controlling heating

07. Brilliant-designed Universal circuit board structural support, weld zone part non-support, none sink

08. Bottom preheater, used to preheat PCB, to make sure it non-deformation, maximum heating area 450 * 500mm

09. No limit for PCB thickness during desoldering

10. No limit for BGA chips size during desoldering, max size for 775CPU, min size for CCD grain

11. Dimension: L450 * W450 * H460mm

12. Power supply: 220V 5060Hz

13. Effective power: 1900W

14. Weight: 20kg

15. Factory bulk welding success rate up to 98%, machine warranty for 1 year

RE:Not support communication by software with Com.

Thanks for your order!

Disassembled LY Desktop mini Fiber Laser Marking Machine upgrade Rotation axis 20W 30W  Metal Engraving Machine for PVC Plastic Stainless Steel Cartoon Package

Technical Parameter

Thanks for your order!

When used according to the manual, the energy resolution of 662 keV gamma rays is guaranteed to be no less than 8.6%, with a typical resolution of 8.2%. The energy uncertainty is within the factory rated value of ± (2%+10 keV) and the typical value of ± (1%+5 keV).

Weight: Around 350g

Package: 20*12.5*8.5CM

Thanks for your order!

When used according to the manual, the energy resolution of 662 keV gamma rays is guaranteed to be no less than 7.8%, the typical resolution is 7.5%, and the energy uncertainty is guaranteed to be no less than ± (2%+10 keV) and the typical value is ± (1%+5 keV) when leaving the factory.

Weight: Around 350g

Package: 20*12.5*8.5CM

Thanks for your order!

• Triple sensor: CsI 6Li and PIN for γ / β / α / n measurement
• Neutron identification
• 5.9%±0.3% FWHM resolution @662keV
• AA battery powerd and NiMH charge ability
• Free PC Software and App for smartphone
• Available item

Product Highlights

• 5.9% ±0.3%FWHM resolution @662keV
• Triple sensors in one : CsI PIN and 6Li
• Neutron sensor with advanced identification algorithm
• Gamma sensitive 100cps/μSv@60keV
• Low energy drift in working temperature range
• Long-term storage ability

Product Features 

• CsI (2.54cm³) and 6Li scintillator and SiPM, and auxiliary sensor using PIN Sensor (16mm²).
• Powered by 3*(AA/LR6) or 3*HRM6 batteris for up to 7 days of continuous use.
• Support USB (type-C) and POE power supply, Type-C port can use to charge the battery.
• Weighs 305g and includes a display that can directly show the energy spectrum and other data with no need to connect to a cell phone.
• Wide range of interfaces, Bluetooth and RJ45 ports (supports POE power) and microSD card slot for easy data transfer.
• IP65 waterproof.

Product Functions

• Radiation measurement with Multi-Channel analyzer
• Dose display based on energy compensation
• Manual radioactive isotope identification

Packing List:

KC761CN *1

Short strap *1

Thanks for your order!

Ring jewelry rotary axis for fiber laser marking machine 90 degree rotation marking Rotary elastic mounting. Fast loading and unload

Size:100*80*180mm

Base size:100*80mm

Middle centre height: 81mm

Angle adjust range: 90 degree

Stepper motor: 57

Copper Clamp size:50mm (With 3 pins) Support Enpand and Shrink

Shrink range: 2-60mm

Expand range:10-65mm

Weight:5KG

(RE: If DIY need to use with stepper motor drive together. )

Thanks for your order!

Brand: LY

Model:D80/D100

Clamp Diameter: 80mm / 100mm

Claw quantity: 3

Version: Short / High

Motor: 57*76mm(SNOWIT) With 2 Meter wire

RE: Main difference between Short & High version:

1. 1.    Total height difference

Short version: 110mm / High version 170mm

1. 2.    Centre height difference

Short version:70mm / High version: 130mm

1. 3.    High version support 180 degree adjust, short version support 45 degree adjust.

Application:

Fiber laser marking / Laser welding / CO2 laser engraving

Thanks for your order!

Tapping Machine Vertical Type Universal Electric Tapper Threading Machine M3-M16-M36

Electric tapping machine is applicable to all machinery manufacturing industry, machine tool, mould machinery, plastic machinery, printing machinery, packaging machinery manufacturers, engineering machinery, automobile motorcycle parts, aviation engines, rolling stock, tobacco machinery and general machinery and other industries.

Electric tapping machine for workpiece materials: electric tapping machine can be in the lead, copper, A3 steel, cast iron, cast iron, Q235, 45#steel, S136 steel, 718 steel, ace, NAK80 die steel and other metal materials for easy tapping operations.

Machine features:

1.The tapping motor of the tapping machine is balanced and perpendicular to the suspension support frame, which can keep the tapping motor moving to any position and can be kept perpendicular to the workbench.

2.The tap of the tapping machine is equipped with overload protection device. With the clamping head of overload protection device, the safety clutch can be adjusted when the tapping exceeds the rated torque, and can avoid damage to the tap.

The machine can be used in single-phase 220V power supply.

3. It has the advantage of high cost performance, lower price and more function than the domestic and international model machines, and many inventions surpass other brands.

4. Advanced mechanical design, all kinds of processes are used in moulding production, with low cost and beautiful appearance.

5. Simple and flexible operation, able to quickly locate and accurately process complicated and bulky work.

6. Can (optional) universal head, the work head can adjust at any Angle, vertical, horizontal, lateral, high and low can tap the silk.

7. The taper sleeve has an overload protection device to ensure that it does not damage the tap, the load balance in the tapping process, the high precision of the screw processing, and the protection of the torsion force.

8. Infinitely variable speed, can adjust any speed, the speed can be set on the controller.

9.manual, automatic and gap three modes of work are your choice.

10.Automatic mode can control the tapping depth effectively, without operation button, it is controlled automatically by the depth controller.

11. Rapid positioning, quick tapping speed and high production efficiency.

12.Servo drive control, overcome the limitations of pneumatic tapping machine, lathe, drilling machine or manual tapping machine.

Details:

1.Equipped with high speed servo motor, the maximum speed can reach 5000 revolutions per minute. Stable performance and long life.

​2.Super wear-resistant planetary reducer, stable performance, low noise. Average life is 20000 hours, noise is less than 60DB. Lubrication: long acting grease. Protection level: 1P65.

3.The right handle handle design, can use the thumb to control the speed switch (ergonomic design), flexible, smooth.

4.Detachable handle on the left, hands operating on the head, positioning is more flexible, accurate and fast.

​5.Tapping machine chuck, (switching clip).

Parameters:

Model:  M3-M20

Voltage: 220V

Motor Power: 800W

Electric current: 50HZ/60HZ

Spindle speed: 0-200/RPM

Working radius: 1200mm

Working angle: Vertical & Universal type

Chuck type:  M3 M4 M5 M6/8 M10 M12 M14 M16 M18/20

Control panel: Touch screen

Tap capacity: M3-M20

Thanks for your order!

(RE:

1.C / E/ SD/ SDB / SDB2/ JE / JE2 / ZW16 / ZW25 / YHT2 / NX2 / MAX1-4 / MAX1-6 / MAX1-8 / HT2 / YHT3 / YHT4 / HT2/6S above models with Wire Cable Straightener only, other models need to buy extra.

2.Such as ES, SDS, DB2S, JES, JE2S, MAX1/4S, HT2S are touch screen panel models.

3. Crystal Protect case not included, need to buy extraly.

4. Wire collector free gift now.(Before need to buy extraly.)

Options:

1. SWT-608-CN Standard Kit
2. SWT-608-CN Standard Kit + 1 Pair More Knife
3. SWT-608-CN Standard Kit + 1 Pair More Knife + Protective Case

Product Description

Computer Wire Peeling Striping Cutting Machine/ computer strip wire machine 2.5mm2 SWT-608C

The product function characteristics:

Collection and integration, the microcomputer automatic computer for the strip line machine is a kind of introduced in Japan, Taiwan, and other advanced automation technology of all of the numerical control equipment.

Our product is to use LCD screen man-machine dialogue mode, with nice appearance, simple operation, convenient maintenance, stable performance, speed, precision higher main features. Wire length can set arbitrary, thrum and the line end parameters can also according to the customer request to change, different degree of finish stripping wires, also has the high tension line of line, casing of the shear etc. Function

Applications:

Widely used in the electronics industry, the city ahs, electrical appliances, motor, lamps and lanterns, toys, and other various products of wire processing. Optimal stripped wire PVC, teflon, glass wire, etc.

 Technical parameters:

Model：SWT608-C/N（Two-wheel drive wire stripper）

Weight：27KG

Electrical connection: 110V/220V 50HZ/60HZ

Power：200W

Operation interface: English/Chinese (LCD display)

Machine dimension: 460*470*325mm

Wire length range：1～10000mm

Strip length：Front end:0-30;rear end:0-15mm

Length accuracy： ± (0.002xL)mm

Intermediate peeling times:13 times

Wire cross section: 0.1～2.5mm²

Max conduit inside diameter:￠6mm

Wire material:PVC,Teflon,Braided,Fiberglass wire

Blade material: hard tungsten steel

Transport speed: (L=100MM piece/hour） 4000-5000 pieces

Driving mode: two-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)

Stripping speed: The cutting speed and wire feeding speed can be adjusted respectively.

(0 is the slowest, 9 is the fastest)

Thanks for your order!

Thanks for your order!

A2 A3 Paper Laminating Machine Cold Hot Roll Laminator Four Rollers Worker Card Office File Laminator

Product parameters:

1. Type: Cold & Hot Laminator

2. Paper Size: A3+

3. Model: 093T

4. Max sealing width: 335MM

5. Voltage: 220V/50Hz

6. Power: 500W

7. Ready Time: 3-4 min

8. Laminating tempareture: 0~180°C

9. Machine weight: 7KG

10. Machine size: 528*230*308mm

11. Laminating speed: 0.3~3mm/min

Product parameters:

1. Type: Cold & Hot Laminator

2. Paper Size: A2+

3. Model: 092T

4. Max sealing width: 440MM

5. Voltage: 220V/50Hz

6. Power: 600W

7. Ready Time: 3-4 min

8. Laminating tempareture: 0~180°C

9. Machine weight: 9KG

10. Machine size: 643*230*308mm

11. Laminating speed: 0.3~3mm/min

Thanks for your order!

Automatic Cloth Tape Cutting Machine LCD screen Hot and Cold Knife Tube Zipper Heat Shrink Cutter Cutting Machine

Automatic Hot and cold cut machine Cloth Tape Cutting Machine Magic Sticker Tube Zipper Heat Shrink Cutter LCD screen

Product specification

Product Name: Cold and Hot Tape Cutting Machine

Cutting thickness: 1-5mm Cutting

speed: 110 times/min

Cutting width: 9.5cm

Cutting length: 1-9999mm

Power: 0.4KW

Voltage: 220V/110V

Adjust temperature: 0-350

Tool: cold and hot integration Weight: 23KG

Suitable for: hot and cold switchable

Cutting materials: PVC, stickers, heat shrink tubes

Thanks for your order!

1. By using linear bearings, the X, Y, and Z axes can be finely adjusted or quickly positioned, with high positioning accuracy and fast operability

2. The machine adopts a touch screen human-machine interface, controlled by a microcontroller, and can store multiple sets of user temperature curve data. It has password protection and modification functions when turned on, and the temperature is reflected in the form of a curve on the touch screen for display during operation. It also has instant curve analysis function

3. Adopting independent heating in three temperature zones, hot air heating in the upper and lower temperature zones, and infrared heating in the bottom temperature zone, the temperature is precisely controlled within ± 3 degrees. The upper temperature zone can be freely moved as needed, and the second temperature zone can be adjusted up and down. The upper and lower heaters can be set with multiple temperature controls simultaneously The IR preheating zone achieves preheating effect on the entire PCBA board.

4. The upper and lower heating nozzles can rotate 360 °. The bottom infrared heater can evenly heat the PCB board

5. High precision K-type thermocouple closed-loop control is selected, and an external temperature measurement interface is used to achieve precise temperature detection The positioning of the PCB board adopts a V-shaped groove, and the flexible and convenient movable universal fixture provides protection for the PCB board, preventing damage to the PCB edge components and PCB deformation, and can adapt to the repair of various BGA packaging sizes

6. Using a high-power cross flow fan to quickly cool the PCB board and improve work efficiency.

7. The welding work has an alarm prompt function after completion, and a “advance alarm” function is added for the convenience of users

8. This machine has passed CE certification and is equipped with an emergency stop switch and an automatic power-off protection device for abnormal accidents. In the event of temperature loss, the circuit can automatically power off and has dual over temperature protection function

9. The device software comes with a 100% output control for air volume, which can be saved along with the temperature curve to more effectively ensure the welding effect.

2、 Technical parameters

Total power 4500W

Upper heating power 800W

Lower heating power 1200W

Lower infrared heating power 2400W (1200W controlled)

Single Phase AC 220V ± 10 50Hz power supply

Positioning method: V-shaped card slot+universal fixture

Temperature control high-precision K-sensor closed-loop control, independent temperature measurement up and down, temperature accuracy can reach plus or minus 3 degrees;

Electrical material selection: touch screen+microcontroller

Maximum PCB size 330 × 310mm

Minimum PCB size 10 × 10mm

Number of temperature measurement interfaces: 1

PCB thickness 0.3-5mm

Applicable chips 1*1mm-50*50mm

Dimensions 500 × 530 × 580mm

Machine weight Net weight 40kg Gross weight 55kg

Thanks for your order!

1. Independent three-temperature zone temperature control system

2. The upper temperature zone is heated by hot air, and the lower temperature zone is heated by IR infrared, which can be controlled independently.

3. The upper temperature zone and IR temperature zone are heated at the same time, and the principle of rapid cooling of cross-flow fan ensures that PCB will not be deformed during disassembly or welding;

4. The machine is simple and fast to operate, can directly place the PCB motherboard on the support bar, by moving the heating head before and after and rotating to any position on the board surface;

5. The upper temperature zone can be moved in any direction of manual rotation;

6 Using high-precision thermocouples to achieve precise temperature detection;

7. Equipped with a variety of different sizes of alloy hot air nozzle, 360° rotation, easy to replace, can be tailored according to actual requirements;

8. For large heat capacity PCB and other high temperature requirements, lead-free welding can be easily handled.

9. The tray slides on linear bearings, allowing for precise adjustment of its movement.

10. A high-power constant-current fan dissipates heat from the infrared component, enabling rapid cooling of the PCB.

LY R5800 Equipment Specifications:

Nozzle 4pcs

Top: 28/38/48mm

Bottom 50mm

Thanks for your order!