JD-5500C JSDA 35000 RPM 120 Watt Big Power Nail Drill Pedicure Manicure Milling Machine Device Manual Electric Tool For Jewelry Jade Stone Wood Carving Engraving Mill

JD-5500C JSDA 35000 RPM 120 Watt Big Power Nail Drill Pedicure Manicure Milling Machine Device Manual Electric Tool For Jewelry Jade Stone Wood Carving Engraving Mill

Model: JD5500C

Power: 120W (Big power handle)

Input voltage: 220V

Weight about: 1850g

Frequency: 50-60Hz

Size: 74 * 165 * 192mm

Colour: Black

Handle parameters:

Model: JDS78

Torque: 7Ncm

Speed: 0-35000RPM.MAX

Weight about: 247g

Operation Replace the grinding head (to avoid damage to the machine and the handle):

1, JD5500C in order to make the handle more stable and no jitter, for a big spring, replace the grinding head to use a little bit more strength.

2, the replacement of the grinding head must be needle insert rotating handle, unscrew the handle left unplug the grinding head, in the absence of grinding head into the case, do not turn the handle to the right, this time will be locked Chuck, grinding head can not be inserted into it

3, when not in use must insert the needle, there is no needle, the handle will be difficult to open (due to the replacement of the grinding head caused by improper grinding head can not be inserted into the handle)

Packing List:

* Control box

* S78Handle

* Large Foot switch(speed regulation)

* A pair of carbon brushes

* Power line

* Handle bracket

* Four grinding head 

* A spanner

Features: 

1. Chang the speed constantly and discretionarily ranging from 0 to 35000 per minute.

2. LED speed display window can give you intuitive visual to selects the motor effectively.

3. Touch panel,touch light,dust-proof effect.

4. Forward reverse selection switching delay of 2 seconds protects the motor effectively.

5. Automatic overload protection of the microcomputer can protect safety of both the operator and the machine.

6. Hand, foot variable speed control systems are chosen. Both hand and foot can raise working efficiency.

7. High concentricity rotation clamping system configured Japan dedicated

high -speed bearings makes the state with low heat, low noise and low vibration.

8. Phone hook position of user-friendly design with the left and right selection

makes left and right hand easy to operate.

9. The coaxality is 0.02MM.

Thanks for your order!