Manual Bending Machine LY-23000c Bending Angle 30-120° Bending 2.5-25² Wires / Cables 3mm Wire Small Size And Easy To Carry

Product Parameter

Detailed page text

Manual cable bending machine

Can bend 2.5 25 square wires / cables 3mm wire, steel wire

Processing effect

This machine mainly folds wires and cables into a certain arc, in order to realize the rest of the overhead lines, switchgear and metering facilities, such as the effective connection of power supply equipment.

Bending angle 30-120°C

Product Details

Handle

Folding wrench is easy to carry and easy to pull the handle, the handle is strongly bent and molded in a single operation.

Angle Ruler

Folding Angle Ruler for more accurate bending angle

Table fixing hole

Can be equipped with desktop fastening G-clamp, the bending machine will be fixed on the desktop, so that the bending line more labor-saving.

Adjustment screws

Adjustment of the machine _ above the screws, can be adjusted to bend the cable of different thicknesses and sizes

Short bending accessories

Short wire bending accessories can be fixed on the back of the machine when not in use, when bending short lines installed in the bending rail

Small size and easy to carry

The machine is lightweight and small in size for easy portability

Short wire bending accessories

Shortest bending with loop 15mm

Maximum length without loop is 25mm

The loop can be fixed on the back of the machine when not in use

Product Features

1, Bending 2.5-25² wire and cable copper wire aluminum wire, diameter 4mm or less wire.

2, handle lengthened folding, storage self-locking.

3, bending guide wheel for the activities of the effort does not hurt the wire skin.

4, the return spring increased and thickened, not easy to deformation damage.

5, two groups of the same direction and reverse positioning column, multi-group positioning easy to use

6, with desktop fastening G clamp, bending thick line more labor-saving.

7, with bending angle sign, bending more convenient

8, 4 column feet set of silicone balance tube, placed more stable.

Manual bending without electricity

Bend and shape at once by pulling the handle

With the heart to do service with quality to compete

Good quality does not shoot details to enlarge than

Exquisite stainless steel material precision angle ruler zero error

Folding handle is lightweight and easy to carry

Exquisite workmanship polished smooth

Positive screws to adjust more convenient cable blocker accurate control of the length of the cable

Equipped with short wire bending accessories can be bent short wire angle ruler clear can accurately control the bending angle

Inferior rusty iron material no angle ruler error big

Handle cannot be folded weight is not convenient to carry

Rough workmanship, not smooth polishing

The back of the screw adjustment is inconvenient without wire blocking plate wire length error is large

Large gap in the middle cannot bend short wire, no angle ruler bending angle error is largeLarge gap in the middle cannot bend short wire; no angle ruler bending angle error is large

Solve the four major problems of the machine

Make every user feel at ease

Failure to achieve product quality

Bulky and hard to carry

Inconvenient to work outside when electricity is needed

Old design and single function

Thanks for your order!