LY-R5820 3 Zones Hot Air Rework Station Touch Screen Control for Game Console Computer Motherboard Chip Repair With SP360C Kits

1、Features:

1. By using linear bearings, the X, Y, and Z axes can be finely adjusted or quickly positioned, with high positioning accuracy and fast operability

2. The machine adopts a touch screen human-machine interface, controlled by a microcontroller, and can store multiple sets of user temperature curve data. It has password protection and modification functions when turned on, and the temperature is reflected in the form of a curve on the touch screen for display during operation. It also has instant curve analysis function

3. Adopting independent heating in three temperature zones, hot air heating in the upper and lower temperature zones, and infrared heating in the bottom temperature zone, the temperature is precisely controlled within ± 3 degrees. The upper temperature zone can be freely moved as needed, and the second temperature zone can be adjusted up and down. The upper and lower heaters can be set with multiple temperature controls simultaneously The IR preheating zone achieves preheating effect on the entire PCBA board.

4. The upper and lower heating nozzles can rotate 360 °. The bottom infrared heater can evenly heat the PCB board

5. High precision K-type thermocouple closed-loop control is selected, and an external temperature measurement interface is used to achieve precise temperature detection The positioning of the PCB board adopts a V-shaped groove, and the flexible and convenient movable universal fixture provides protection for the PCB board, preventing damage to the PCB edge components and PCB deformation, and can adapt to the repair of various BGA packaging sizes

6. Using a high-power cross flow fan to quickly cool the PCB board and improve work efficiency.

7. The welding work has an alarm prompt function after completion, and a “advance alarm” function is added for the convenience of users

8. This machine has passed CE certification and is equipped with an emergency stop switch and an automatic power-off protection device for abnormal accidents. In the event of temperature loss, the circuit can automatically power off and has dual over temperature protection function

9. The device software comes with a 100% output control for air volume, which can be saved along with the temperature curve to more effectively ensure the welding effect.

2、 Technical parameters

Total power 4500W

Upper heating power 800W

Lower heating power 1200W

Lower infrared heating power 2400W (1200W controlled)

Single Phase AC 220V ± 10 50Hz power supply

Positioning method: V-shaped card slot+universal fixture

Temperature control high-precision K-sensor closed-loop control, independent temperature measurement up and down, temperature accuracy can reach plus or minus 3 degrees;

Electrical material selection: touch screen+microcontroller

Maximum PCB size 330 × 310mm

Minimum PCB size 10 × 10mm

Number of temperature measurement interfaces: 1

PCB thickness 0.3-5mm

Applicable chips 1*1mm-50*50mm

Dimensions 500 × 530 × 580mm

Machine weight Net weight 40kg Gross weight 55kg

Thanks for your order!